GWN7660 Deployment scenario, Performance, Antenna Data Sheet and Radiation Pattern

Description:

This article describes the test bed setup and testing results of GWN7660.


The maximum wireless performance is tested under high SNR, it means that it must meet requirement such as:

a. A good wireless environment where there are no other interference signals
b. AP must be close to STA (client devices), and STA have a consultative perspective with AP (after adjustment)

Theoretically, the maximum negotiating speed for 5GHz is 1.2Gbps while 2GHz is 400Mbps
For the 1.77Gbps throughput, 1.2+0.573=1.77 (5G+2G).

Our testing results:
5G test result = 950+Mbps

2GHz test result = 300+Mbps
Our test result is close to the theoretical efficiency of the mac layer, it’s on the same level as other manufacturers.

Our test result is close to the theoretical efficiency of the mac layer, it’s on the same level as other manufacturers.


Question:

How do we set this consultative perspective with AP?

It is related to the distance between AP and STA and angle between AP and STA.

To achieve a maximum throughput results, you require a good terminal for eg. Intel AX200.

Please refer to the table below

Leave a Comment